Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

CO2 Inflators

Vittoria Pit Stop Tire Sealant
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Serfas 12-Gram CO2 Non-Threaded Cartridges
$10.00
These compact, non-threaded 12-gram cartridges work with compatible CO2 inflators and pack easily into your seat bag.
Planet Bike 16g CO2 Replacement Cartridges - Threaded
$9.99 - $224.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
Planet Bike Red Zeppelin CO2 Inflator
$19.99
You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."
MSW Airstream Pump
$20.00
The AirStream Inflator (INF-200) is MSW's ultra-small, minimalist compressed-air inflation device, featuring easy twist-on / twist-off operation and cartridge storage threads. - Composite body with alloy head - Plug to keep the cartridge interface clean - Simple twist on/off operation
MSW Jetstream Adjustable Inflation Head: Presta and Schraeder
$20.00
Lightweight and easy to use, MSW’s Jetstream adjustable inflator head works with all 3/8" threaded inflation canisters and allows you to vary the CO2 flow to avoid overfilling your tires. - Adjustable airflow with a convenient shut-off feature - Easily pushes onto Presta or threads onto Schrader valve tubes - Knurled knob for reliable grip even with mittens or gloves - Inflator head only
Genuine Innovations AirChuck Elite CO2 Tire Inflator
$24.99 $29.99 17% Off
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
Genuine Innovations CO2 Refill Cartridges (20-pack)
$59.99 - $64.00
- Standard threaded cartridges are 3/8" x 24tpi thread to fit any brand inflator - Law prohibits ORM-D materials from shipping by air - Box includes 20 CO2 cartridges
Genuine Innovations Deluxe Tire Repair & Inflation Kit
$36.99
The Genuine Innovations deluxe kit offers a complete CO2 bicycle tire repair and inflation solution for all your flat tire needs. Comes with everything needed to repair and inflate multiple flat tires, all packed in an easy-to-store zippered wallet. Featuring the popular Ultraflate cupped inflator, this deluxe repair kit is so quick and easy to use, you'll be back to riding your bike in no time! - Repair and inflate multiple tires - Quick inflation - Compact and stores easily - Full kit weight: 292 grams - Compatible with non-threaded 20 gram CO2 cartridges and threaded 16 gram, 20 gram and 25 gram CO2 cartridges - Works with both Presta and Schrader valves - Store a non-threaded 20 gram CO2 cartridge in the cup Includes: (1) Ultraflate inflator with trigger-controlled technology (3) 20 gram non-threaded CO2 cartridges (1) Small patch kit (6 patches and 1" square sand paper) (2) Tire levers (1) 5.5" L x 6.5" W padded, zippered wallet
Topeak Airbooster G2 CO2 Inflator
$52.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak Tubi Master X with 25g CO2 Cartridge
$69.95
A micro-sized tubeless tire repair and inflation kit featuring an advanced 2-in-1 CO2 injector head that repairs a puncture and inflates the tubeless tire in one step with massive air or can simply be used as a traditional CO2 inflator via the valve stem. The inflator head is compatible with both Presta and Schrader valves and the included velcro strap attaches to seatposts, saddle rails, or frame tubes and can carry one or two threaded 16g or 25g CO2 cartridges. - Advanced press type CO2 inflator, one 25g CO2 cartridge, stainless steel 2-in-1 tire reamer/plug insertion tool, plug retainer, and disc insertion spacer - CNC aluminum inflator head fits Presta / Schrader valves - Repair plug compartment, velcro strap, dust cap - Adjustable velcro strap mounts to seatpost, bike frame
Specialized SWAT Mini CO2 Head
$11.99 $12.00 On Sale
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Silca EOLO III CO2 Regulator ONLY
$26.00
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, "Before EOLO, you had to turn the cartridge and pray!" Giving the user the ability to regulate the flow of gas into the tire was the key to the widespread adoption of compressed gas for roadside use. EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with a light-action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely from 6063 series aluminum and stainless steel. Hardened tool steel puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years. - 6063 series aluminum body with Red-White-Green Insulators - Lightest spring action of any spring-valve regulator - Hardened tool steel puncture pin - 'Camera-lens' style valve head allows for easy installation even in disc wheels
SKS Airbuster CO2 Inflator
$31.99
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
Pro Micro C02 Inflator
$19.99
- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible
Prestacycle Alloy CO2 Pump
$24.95
Prestacycle Alloy CO2 Pump is NOT a complete pump. Roughly the size of a CO2 cartridge and much lighter weight, this is your LAST CO2 cartridge. Simply attach it to your CO2 head, open the valve and pump! Eliminate CO2 range anxiety without having to carry a whole pump. If you use CO2, another pump head would be redundant. Capable of reaching 120+ psi, this is not the fastest pump, but a whole lot faster than walking. CO2 head required, not included. - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED - Presta ONLY. Most CO2 Heads only work on Schrader valves with high Cartridge pressure. Features: The ENDLESS spare CO2 Cartridge! The Prestacycle Alloy CO2 pump is the end of CO2 range anxiety. CO2 is great for fast, high pressure fill-ups, however, when you’re out, you’re out of luck! You can carry as many Cartridges as you think you need, now your last one can be endless. Same space as a cartridge, but lighter. CO2pump takes about the same space as a cartridge, but weighs only 35 grams. Unlike pumps, why waste space and weight to carry a pump head? Your CO2 Head is already a pump head with CO2pump. Although small, CO2pump is engineered to service high pressure. We designed a tiny pump with a compression ratio that enables you to reach 120psi without straining. With our design, smaller simply means more strokes, not a lack of pressure. Compatible with most brands of CO2 Heads*. Got a favorite CO2 Head? Already own one? CO2pump works great with most Heads. Simply attach the pump like a cartridge, open the valve and start pumping. *If your Head is a push-to-inflate head, you will need to hold the “push” action open while pumping. CO2pump is so much faster – than walking. No matter what goes wrong, inflation will not be the problem that keeps you flat. CO2pump will get you back on the road. Specifications: - Replace your spare CO2 Cartridge with a backup that never runs out - Same overall space as a CO2 Cartridge, and much lighter - Use your CO2 Head. No need to waste space and weight with a full pump - Compatible with Many Heads. (Push to inflate heads must be held open) - Engineered with a compression ratio to easily reach 120psi - End CO2 range anxiety, So much faster than walking! - Only 111mm (4.4?) by 20mm (0.8?) diameter - Weighs only 35 grams! - CO2 Head required, NOT INCLUDED Disclaimers CO2 Head required, not included. Compatible with most brands of CO2 Heads. Note: push to inflate heads need to be held in the inflate position while pumping.
Prestacycle Prestaflator Micro CO2 Bicycle Inflation Tool
$16.95
The new Standard in light, reliable inflation! Prestaflator Micro is a superlight CO2 inflation head and more! We've combined technologies to make a head 33% lighter than any other major brand, and provides secure, leak-free connection with the greatest possible inflation control! The Cartridge is the flow control Knob The best way to inflate CO2 is with a variable flow knob. The bigger the knob, the better the flow control. Prestacycle introduces it's revolutionary design – the Cartridge is the Knob! Save weight, size and complexity with our design. Secure, no-loss connection. Prestaflator Micro uses a threaded Presta / Schrader head. Secure attachment with a perfect seal insures you don't loose any CO2. 100% of the cartridge contents will go towards inflation Easy operation You can install the cartridge first, or put the head on the valve first. Prestaflator Micro works perfectly either way. When you screw the cartridge onto the head – NO CO2 will flow. There is no-loss from installing the cartridge. To inflate, Slightly un-screw the cartridge, and inflation begins. The more you unscrew, the faster it flows. Works great – even for seating tubeless tires. If you close the cartridge again, flow stops completely. If you leave the cartridge on, it will retain the contents for an extended period of time. Specifications: - 33% Lighter and smaller than any major brand - The Cartridge is the Knob! - Turn Cartridge (instead of a knob) for precise flow control - Secure Presta / Schrader Threaded head prevents loss - Only 12 grams weight! - Precision Machined alloy for long life - Compatible with CO2Pump for a 48 gram total Pump option! - Compatible with our Compressor Adapter for unlimited inflation!
Planet Bike 12g CO2 Replacement Cartridges - Threaded
$49.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - Unable to ship to Canada
Planet Bike 25g CO2 Replacement Cartridges - Threaded
$8.99 - $99.99
Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2
Planet Bike Air Kiss CO2 Inflator
$12.99
Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.
Planet Bike Airship 2.0 CO2 Bike Tire Inflator
$19.99
Blast off with Planet Bike's Airship 2.0 CO2 Bike Tire Inflator. It's lightweight, strong and easy to use. Stash it in your bike bag or jersey pocket and away you ride. - Lightweight aluminum design stores cartridge and protects from cold cartridge when in use - Auto head fits both Presta and Schrader valves - Accepts 16g threaded and non-threaded cartridges - Includes one 16g threaded CO2 cartridge - Small size fits in saddle bag or jersey pocket - Length: 130mm - Weight: 123 grams
Planet Bike Black Zeppelin CO2 Bike Tire Inflator
$24.99
Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Includes two 16g CO2 cartridges & insulator sleeve - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)
Planet Bike Black Zeppelin CO2 Tire Inflator Head
$19.99
Our Black Zeppelin CO2 bike inflator is ultra-lightweight, sleekly designed, and easy to use. It’s precision-machined for strength and reliability. The pierce indicator on the Airflation control knob lets you know when the cartridge has been punctured and the device is ready to inflate your bicycle tire. It accepts all types of threaded cartridges and works with Presta and Schrader valves without the need for an adaptor. It'll make quick and accurate work of road side repairs so stash it in your bike bag or jersey pocket and away you ride. - Precision-machined body and head for improved reliability and ease of use - CO2 pierce indicator reveals when CO2 cartridge is punctured and ready for use - Fits Presta and Schrader valves without adapters - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 45 x 32 x 21 mm - Weight: 24 grams (without CO2 cartridge)
Planet Bike Red Zeppelin CO2 Bike Tire Inflator (Metal Head Only)
$14.99
Planet Bike's Red Zeppelin CO2 bike tire inflator features rugged metal construction and the Airflation control knob for reliable and accurate inflation. It accepts all sizes of threaded cartridges and the inflator head threads directly onto either Presta or Schrader valves without an adapter. It'll make quick work of roadside repairs. - Precision-machined body and head with Airflation Control 2.0TM knob for improved reliability and ease-of-use - Threads directly onto Presta or Schrader valve without adapter - Compatible with threaded cartridges - Small size fits in saddle bag or jersey pocket - Size: 48 x 40 x 25 mm - Weight: 56 grams
Planet Bike Red Zeppelin CO2 Inflator Head
$11.99
You'll have a whole lotta love for Planet Bike's Red Zeppelin CO2 Inflator Head on long rides. It fits Presta and Schrader valves and weighs next to nothing. Its small size means the Red Zeppelin fits easily in bags, pockets, and packs. And, it's compatible with threaded cartridges (sold separately). Now you'll never be stuck like a "Fool in the Rain."
PDW Barkeep Inflator
$35.00
The BARkeep integrates Portland Design Works' exclusive Tap Handle technology that carefully controls the flow of CO2. Compatible with both Presta and Schrader valves, the BARkeep also integrates a pressure gauge to ensure a perfect pour to fix your flat. A beginner-friendly CO2 inflator! - CO2 inflator with integrated pressure gauge - PDW exclusive Tap Handle technology controls CO2 flow while protecting your hand from frosty cartridges  - Weight: 94g (3.3oz) - Length with Tap Handle: 175mm (6.9") - Length without Tap Handle: 87mm (3.5")
PDW Fatty Object CO2 Inflator Head
$19.00
The Fatty Object CO2 inflator fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. - Precision machined alloy parts - For use with both Presta and Schrader valves
PDW Fatty Object CO2 Inflator w/Cartridge
$35.00
The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty
PDW It's a CO2 Inflator
$21.99
It's a CO2 inflator! Constructed of durable alloy and composite, this price-point CO2 inflator is sure to save you on the side of the road. The oversize control knob makes for easy regulation of air flow. Comes with two 16g CO2 cartridges and a foam sleeve to protect your fingers from the frosty cartridge. - Oversize control knob regulates CO2 flow - Durable composite and alloy construction - Includes 2x 16g CO2 cartridges + 1 foam sleeve - Presta and Schrader compatible
PDW Ninja Pump
$35.00
Portland Design Works' Ninja Pump puts the ancient arts of stealth and power in the palm of your hand. It is master of two fighting styles: Pump and CO2 inflator. It knows the way of the Schrader and Presta, and threads on to both for secure inflation. Like any highly-trained warrior, it excels under pressure, and can overcome even the most formidable 120psi tire. - Alloy construction  - Control knob easily regulates CO2 flow - Composite pump mount fits under bottle cage - Weight: 74 g (2.6 oz) - Length: 147 mm (5.75") - Lifetime PDWarranty
Page 1 of 3 Next page