Filter By:
- Bar Ends (8)
- BMX (50)
- Bottom Brackets (212)
- Brakes/Levers/Pads (554)
- Cables (151)
- Cassettes/Freewheels (128)
- Chainrings (240)
- Chains (132)
- Show More Categories
- Cranksets (261)
- Derailleurs (165)
- Forks (162)
- Groups (27)
- Handlebar Grips/Tape (281)
- Handlebars (224)
- Headsets (112)
- Pedals (310)
- Saddles (298)
- Seatposts (93)
- Shift/Brake Combinations (70)
- Shifters (129)
- Shocks (22)
- Stems (136)
- Other (1694)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
- Simple and reliable square taper bottom bracket
- Replaces both BB-UN26 and BB-UN55
- Sealed cartridge bearings
- Cr-Mo axle
- For bicycles equipped with a chain case, select BB-UN300-K
- For E-type front derailleur compatibility, choose BB-UN300-E
- Fixing bolts not included; Shimano FC-E6000 bolts suggested
SHIMANO DEORE - 126 links for HG 12-SPEED - MTB Chain
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
- Proprietary design ensures smooth shifting and strength
- Extended inner plate improves chain engagement and retention
- Shorter shift times and less pedaling shock
- Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
CN-E6070-9
Chain (9-speed)
FEATURE
- New chain plate dimension
BENEFIT
- Reinforced against chain cut for E-BIKE use
- More efficient and silent, less maintenance by SHIMANO “SIL-TEC”(CN-E6090-10)
- Front single gear only
- Enhanced pedal-to-shoe contact area with mud-shedding profile
- Wide bearing placement for rigidity and uniform load distribution
- Slimmer, weight-optimized axle with 2 length options
- Low platform height for pedaling stability
- Lightweight, 310 g (11 oz.) per pair
- Slimmer axle housing better sheds mud and debris
- Binding Dual Sided
- Cartridge axle
- SM-SH51 Cleat included
- Cleat retention adjuster
- Offset binding
- Sealed mechanism
- Average weight: 310g (Short axle type)
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)
- 3 mm shorter axle version (52mm)
- 1.0 mm cleat spacer included
The RRL SR transcends the ages by offering a race quality lever without an integrated shifter. The classic styling trademarked by heroes of decades past make this a stylish lever for single speeds, fixed gear or custom applications. Th ergonomically shaped lever is drilled to enhance beauty while reducing weight. Hoods are flat and textured for enhanced grip. A built-in push button quick release system provides cable slack for quick wheel removal or additional tire clearance when conditions get muddy.
SPECIFICATIONS
- RRL SR
- Available with gum or black hoods.
- Pull ratio compatible with Spyre and road/cyclocross rim brakes
- Sold as a set (left and right)
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.40
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool
$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.
$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
Page 1 of 179
Next page