Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals
$1,099.99
Rally RK200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RK200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite LOOK KEO cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 326g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,099.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 320g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$1,059.99
Rally XC200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally XC200 measures much more. These metrics help you identify your strengths and weaknesses, so you can work to improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$699.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 334g
- Water resistance: IPX7
- Cleat type: KEO
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RK100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$649.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 328g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$449.99
The Speedplay Nano is a featherweight, dual-sided road pedal that lives up to the demands of sprint finishes, categorized climbs, and tough training sessions. The mix of premium titanium and carbon fiber materials creates a lightweight but strong pedal that will hold up and deliver speed on the breakaway. The integrated cleat system with 3-axis adjustability allows you to precisely dial in your fit for optimized biometrics and increased power transfer.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimze fit and enhance performace through better biomechanics.
Designed with the same level of focus and dedication it takes to earn a spot on the podium, Nano is a purpose-built, ultralight pedal that utilizes the proven Speedplay platform to offer every advantage come race-day.
- Weight: 168g (per pedal pair)
- Spindle Material: Titanium
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$350.00
The world’s most successful downhill pedal is now available in a premium edition featuring titanium wings and dual-chamfered edges to minimize weight and maximize performance. The Crank Brothers Mallet DH 11 is designed and engineered for the rider who wants the best of the best, and nothing less.
- Titanium wings for reduced weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 8 adjustable pins per side for grip
- Traction pad technology customizable interface
- Ribbed body for better traction when unclipped
- 57mm q-factor for stability at speed
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
- Spindle material: forged SCM 435 chromoly steel
- Body material: 6061-T6 aluminum
- Wing material: 6AL/4v titanium
- Spring material: 300 series stainless steel
- Release angle 15° / 20°
- Max rider weight no restriction
- Q-factor 57mm
- Inner bearing type: IGUS LL-glide bearing
- Outer bearing type: Enduro cartridge bearing
- Endcap hex alloy
- Cleat: Premium brass cleats with shims included
- Weight: 445 grams
$350.00
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all.
- Titanium wings to reduce weight
- Dual chamfered edges to reduce rock-strikes
- Exclusive double-anodized black and gold colorway
- Concave platform for secure foothold
- 6 adjustable pins per side for grip
- Traction pad technology to optimize the shoe/pedal interface
- Ribbed body for better traction when unclipped
- 52mm q-factor for maneuverability on tight trails
- Hex alloy endcap for durability
- 4-sided entry / superior mud shedding
- Customizable float & release angle
- Premium bearings & double seal system
$287.00
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Forged Aluminum
- Spindle: Titanium
- Platform area: 664mm²
- Platform width: 67mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 200g
- Weight (pair + cleats): 450g
- Float angle: 6°
- Release angle: 13°
$280.00
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
$264.00
The X-TRACK RACE CARBON Ti pedals are specifically created for the most unforgiving courses. The mechanism is designed for easy engagement in all conditions and helps to shed mud and debris when clipping in. The carbon body offers a large contact area, while the titanium axle ensures the pedal is stiff and light: a mere 145 grams underfoot.
- Technology: X-Track
- Cleats: X-Track Cleat included (Easy Cleat available separately)
- Cleats standard: SPD compatible
- Retention: 6 to 14
- Body: Carbon
- Spindle: Titanium
- Platform area: 515mm²
- Platform width: 60mm
- Stack height + cleats: 16.8mm (10.7 + 6.1mm)
- Weight (pedal): 145g
- Weight (pair + cleats): 340g
- Float angle: 6°
- Release angle: 13°
$229.99
Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort.
Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics.
Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride.
- Weight: 220g (per pedal pair)
- Spindle Material: Stainless Steel
- Spindle Length: 53mm
- Float: Fixed-15º Micro-Adjustable
- Cornering Angle: 37º
- Bearing: Sealed
$199.99 - $200.00
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris.
Slim Convex Profile
Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support.
Extra Grip
Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized.
Formed with Purpose
The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer.
Reliable Performance
Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Precision Machining
Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm.
Dual-Concave Profile:
- Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side.
Extra Grip:
- Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts.
Shaped with Purpose:
- The shape of Waveform Aluminum Pedals matches the footprint of your shoe
Reliable Performance:
- Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions.
Tapered Edges:
- Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain
Two sizes:
- Large: 112mm x 106mm - 384g
- Small: 105mm x 99mm - 373g
Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$197.00
The Dagga is our brand new DH pedal. It was designed in collaboration with Chris Kovarik – one of the forefathers of downhill and flat pedal riding. Kovarik's unique and high-impact riding style inspired the Dagga's key features – our largest platform and widest stance ever.
- Meant to be ridden with thick-soled shoes, the Dagga offers improved stability, power and articulation of the bike.
- The Dagga features the same high strength chromoly axle system as other models with a double seal, inner bushing and outer cartridge bearing.
- Largest Q-Factor, largest body, longest and largest amount of pins!
$195.00
- Pedal Weight (pair): 260g
- Size: 102 X 96 X 11 mm
- Body Material: magnesium extruded / CNC machined
- Spindle: CNC machined, cr-moly
- Pedal Bearings: thrust bearings / IGUS bushings
- Pins: replaceable SAP (1/8" x 8mm) pins
$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$185.00
- Power transfer and stability are maximized with a large, 725mm2 surface area.
- Bottom fairing to improve aerodynamics and protect the carbon blade.
- TIME's patented preopened ICLIC system allows for fast and easy cleat engagement.
- Tension adjustment on the carbon blade has three positions to precisely manage the pressure of the clamping mechanism.
- Hollow, stainless steel axle.
Specs:
- Pedal Material: Carbon
- Pedal Weight: 113g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$180.00
Flat or clipless pedals? The question may arise, but not anymore thanks to the GEO TREKKING commuter range of pedals. This robust aluminum pedal is flat on one side and SPD-compatible on the other, with the added security of the VISION light system for when the ride turns dark.
- Technology: Hybrid pedals = half flat + half clipless
- Cleats: X-Track Easy
- Cleats Standard: SPD compatible
- Release angle: 13°
- Retention: 5-10
- Body: Aluminum
- Traction: 8 traction pins
- Spindle: Chromoly+
- Platform width: 83mm
- Weight (pedal): 247g
- Weight (pair + cleats): 550g
- Light included: Yes (x2)
- Light modes: 3 (steady/flash/flash eco)
- Battery Life: Up to 30h (flash eco)
- Light Output: 15 lumens
- Battery: Micro USB rechargeable (cable included)
- Charging time: 50 min
- Beam angle: 180°
$180.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$180.00
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement.
- Super slick, patent pending, spindle design
- Super low-profile design; 10mm thickness at center
- Custom undercut pins provide “clip in” style grip and easy removal
- Pedal body carriers 4 hidden pins for easy replacement of broken pins
- Tapered outside pedal edge for maximum grip and ground clearance
- Large foot platform for modern day DH, 110x108mm
$179.99
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: 6061-T6 aluminum
- wing material: 17-4PH stainless
- spring material: 300 series stainless steel
- release angle: 15° / 20°
- q-factor: 52mm
- inner bearing type: igus LL-glide bearing
- outer bearing type: enduro cartridge bearing
- adjustable pins: 6 per side for grip
- endcap: hex alloy
- cleat: premium brass cleats with shims included
- weight: 419g per pair
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity.
Specifications:
- spindle material: forged scm 435 chromoly steel
- body material: forged 6061-T6
- inner bearing type: igus LL-glide bearing
- outer bearing type: igus LL-glide bearing
- footprint: 100mm x 100mm (small) / 114mm x 111mm (large)
- adjustable pins: 10 per side
- minimal profile: 11mm-13mm thin
- stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
- stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu)
- weight: 375g per pair (small) / 405g per pair (large)
$179.99
- Pedal Weight (pair): 460g
- Cleat Weight (pair): 64g
- Size: 85 x 94 x 14 mm
- Body Material: Aluminum extruded |CNC machined
- Spindle: CNC machined cr-moly
- Pedal Bearings: Sealed bearings |IGUS bushings
- Cleat System: X2 |X1|X1F (HT exclusive system)
- Pins: Replaceable grip pins
$179.99
Low And Lean
Made from super-strong 6061-T1 aluminum, the double concave body is sleek and light while still giving your foot a nice wide platform to stand on.
Round And Round We Go
Fully sealed 4-bearing design makes for smooth rolling rotations over an extremely long life. And the ability to rebuild makes it nearly unkillable.
Ride Don't Slide
Pins at the front and back of the pedal are angled slightly to provide improved traction and foot comfort. Because pedal bites suck.
Look Good Ride Good
Our top of the line pedals come in 6 different colors so that you can add as much flavor and flair to your ride as you like.
Pedal Envy
More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.
Specs:
- Axle Material: Chromoly Steel
- Body Material: 6061 Aluminum
- Material: 6061 Aluminum
- Platform Height (MM):14.5
- # of Pins: 20 SHCS hex traction pins per pedal (10 per side)
- Platform L x W (MM): 114 x 101
- Weight: 355g
$179.95
Based around SPD technology, DMR has engineered an extremely adaptable caged-clip system with the V-Twin. These pedals offer a number of different grip and feel options by utilizing a range of pins paired with a unique nylon "bumper" and metal shim feature.
- Large, extruded and CNC'd aluminum platform cage
- SPD-compatible design with 5 degrees of float
- Nylon 'bumper' and steel sizing shims customize platform feel
- Serviceable bearing system
- 7 tuneable pins per side (full set supplied)
- 4140 chromoly axles
- Anodized finish
- 9/16"
$179.00
- Pedal Weight (pair): 460g
- Cleat Weight (pair): 64g
- Size: 85 X 94 X 14 mm
- Body Material: aluminum extruded / CNC machined
- Spindle: CNC machined cr-moly
- Pedal Bearings: sealed bearings / IGUS bushings
- Cleat System: X1E / X1 / X1F (HT exclusive system)
- Pins: replaceable grip pins
$179.00
- Pedal Weight (pair): 460g
- Cleat Weight (pair): 64g
- Size: 85 x 94 x 14 mm
- Body Material: Aluminum extruded / CNC machined
- Spindle: CNC machined cr-moly
- Pedal Bearings: Sealed bearings / IGUS bushings
- Cleat System: X2 / X1/ X1F (HT exclusive system)
- Pins: Replaceable grip pins
Page 1 of 8
Next page