Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$15.23
Campagnolo front derailleur parts for repairs.
$22.45
Campagnolo EKAR disc brake adapters.
- Includes bolts
$23.95
Campagnolo EKAR disc brake adapters.
- Includes bolts
$24.26
Campagnolo front derailleur parts for repairs.
$24.89
Campagnolo Pulley Bolt Sets
$28.45
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount.
$29.76
Campagnolo lockrings for use with N3W freehubs only.
- Aluminum construction
$41.79
Campagnolo Miscellaneous Rear Derailleur Parts, Adjusting Screws
$48.62
Inner cage for Campagnolo Record and Super Record rear derailleurs.
- For use with 12-speed rear derailleurs and a 34t large cog cassette
$51.03
Campagnolo Pulley Assemblies
- Drivetrain Speeds: 10
- Does not fit 2004-2008 Record 10 speed (carbon pulley cage)
$52.29
Campagnolo Pulley Assemblies
$55.23
Campagnolo Cassette Lockrings
- Fits 2000 and newer Campagnolo wheels
- Fits all Fulcrum wheels
- Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer
- 27.0mm thread OD
- For use with Campagnolo cassettes with 12 to 16 tooth first position cogs
- Lockring has a 38.5mm flange diameter
$57.86
Campagnolo Return Spring Caliper Brake Part
$64.68
Campagnolo Ultra Torque Cup and Bearing Kits. Includes 2 bearings and 2 seals.
- Kit includes 2 bearings and 2 seals
$70.00
EPS cable guide magnets are required for internally routing EPS wires.
- Includes: wire, metal cable, and magnet
$72.45
Campagnolo Cassette Lockrings.
- Fits 2000 and newer Campagnolo wheels
- Fits all Fulcrum wheels
- Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer
- 27.0mm thread OD
- For use only with Campagnolo 11-speed cassettes with 12 tooth first position cogs
$78.65
Campagnolo Rear Recessed Pivot Bolt Assembly Caliper Brake Part
$82.45
Desgined to increase the stiffness of the EPS front derailleur on frames with flexible braze-on mounts, especially frames with carbon fiber mounts.
- Required for use on carbon frames with carbon front derailluer braze on mounts
$115.71
Campagnolo Pulley Assemblies
$200.00
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
$32.00
Chrome housing end caps are durable and shiny.
- Bottle of 100
$99.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 8mm
- Outer Diameter: 22mm
- Width: 7mm
$106.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 12mm
- Outer Diameter: 24mm
- Width: 6mm